Place of Origin:
Jiangsu,China
Brand Name:
Jufan
Certification:
CE
Model Number:
MGCXHC-IN-SD-40*50ST-T2
CONTACT US
A compact hydraulic cylinder is a hydraulic equipment designed specifically to address limited installation space. It has a total length which is approximately equal to half of a tie-rod cylinder of the same diameter and stroke. This design can be used effectively in various mechanical equipment, such as molds, processing fixtures, where space is an issue.
Layout |
|
||||
Item | Part name | Qty | Item | Part name | Qty |
1 | Tube | 1 | 7 | Rod packing | 1 |
2 | Piston rod | 1 | 8 | Rod cover o-ring | 1 |
3 | Rod cover | 1 | 9 | Piston o-ring | 1 |
4 | Tube | 1 | 10 | Back up ring | 2 |
5 | Piston | 1 | 11 | Cushion o-ring | 1 |
6 | Dust seal | 1 | 12 | Magnet | 2 |
How does the compact cylinder work?
Here's a step-by-step explanation of how a compact hydraulic cylinder works:
Basic Components:
A compact hydraulic cylinder consists of a cylindrical barrel, a piston, a rod attached to the piston, seals, and a hydraulic fluid reservoir.
Cylinder Installation:
The cylinder is installed in a hydraulic system, which includes a pump to generate hydraulic pressure, valves to control the flow of fluid, and other components for specific applications.
Fluid Filling:
The hydraulic cylinder is filled with hydraulic fluid, typically oil-based. The fluid is contained within the cylinder and the hydraulic system.
Piston and Rod:
The piston is positioned inside the cylinder and is connected to a rod. The rod extends from one end of the cylinder, and the other end may be open or closed, depending on the specific design.
Fluid Pressure:
When hydraulic fluid is pumped into the cylinder, it creates pressure. This pressure acts on the surface area of the piston.
Pascal's Law:
According to Pascal's law, the pressure applied to the fluid is transmitted equally in all directions. In the hydraulic cylinder, this pressure is exerted on the piston.
Force Generation:
The pressure on the piston creates a force. The force is calculated by multiplying the pressure by the effective area of the piston. This force is transmitted to the connected rod.
Rod Movement:
As the force is applied to the rod, it starts to move. The movement of the rod can be linear (extending or retracting) depending on the design and application.
Work Output:
The linear motion of the rod is used to perform work in the external environment. This work could involve lifting, pushing, pulling, or any other task depending on the application.
Seals and Fluid Return:
Seals are used in the hydraulic cylinder to prevent fluid leakage. As the rod moves, the displaced fluid is returned to the hydraulic fluid reservoir through the system, completing the hydraulic cycle.
The compact design of hydraulic cylinders makes them suitable for applications with limited space. Despite their small size, they can generate significant force, making them essential components in various industrial and mobile machinery applications. Proper maintenance, including checking for leaks, maintaining the hydraulic fluid, and inspecting seals, is crucial for the efficient and reliable operation of compact hydraulic cylinders.
MG-CXHC A---J---IN---SD---50X30---25mm---TXn---1---02---A
1 2 3 4 5 6 7 8 9 10 11
MG-CXHC : Inductive compact cylinders | ||
1 | Type | (1) A : doubling acting (2) C : double rods (3) D : double rods with stroke alignment |
2 | Option | J: with heat/errosion proof(note :"space"if not be used) |
3 | Rod thread | (1)IN : l.D.thread (2) EX : o.D.thread |
4 | Installation | (1) SD : basic (2) LA : foot type |
5 | Bore (mm) | (1) SD : 32 ,40 ,50 ,63 ,80 ,100 (2) LA : 40,50,63,80,100 |
6 | Stroke(mm) | no "standard stroke"table |
7 | Stroke alignment | only forward alignment and aligned length sstroke length |
8 | Sensor and quantity | (1)T : 2 wires, 2 meters P : PNP3 wires, 2 meters N : NPN3 wires,2 meters (2)n : q'ty |
9 | Packing | (1)1 :(PU)(standard usage) (2)2:(NBR) (3)3:(FPM) |
10 | Flow regulator | (1)02: 1/4"(12/min) (2)03: 3/8"(20/min) (3)04: 1/2"(30/min) |
11 | Check valve | (1)A: 3/8"(50/min) (2)B: 3/4"(125/min) (3)C: 11/2"(320 @/min) |
Compact hydraulic cylinders have a wide range of applications in various fields. Here are some common application areas:
1. Mold manufacturing: Compact hydraulic cylinders are widely used in the mold manufacturing industry for mold opening, ejection, and core extraction operations. Due to its compact design, they can fit even in the most confined spaces.
2. Machine tools: In the field of machine tools, compact hydraulic cylinders can be used for clamping, positioning, and table elevation functions, which can provide efficient and precise force and motion control.
3. Aerospace: Compact hydraulic cylinders are frequently used in aerospace applications, for systems such as landing gear, control surfaces and door operations. Compacting hydraulic cylinders are ideal for those with limited space requirements.
4. Automotive manufacturing: Compact hydraulic cylinders are commonly used for clamping, positioning and adjustment operations on assembly lines. The cylinders are more efficient in providing force and motion control, thus increasing production efficiency.
The Compact Cylinder will be packaged in a bubble wrap and then placed in a corrugated cardboard box. The box will be labeled with a description of the product and the customer's address. The box will then be sealed with tape. The package will then be shipped using a reliable shipping service.
Send your inquiry directly to us